Garmin GPSMAP 76S 사용자 설명서

47

The MapSource Info Page displays a list of the MapSource data stored in the 

unit and description of the highlighted list item.  You can choose to ‘Show’ the 
data on the map, by placing a checkmark in the ‘Show’ Box.  To select/deselect a 
box, place the highlight over the MapSource Item then press ENTER.
 System Info

The  System Info Page will show the software version and the unit ID number.

The Setup Menu is arranged in an easy to use tab format.  Each tab (General, 

Altimeter, Compass,Time, Units, Location, Alarms, Interface) contains the settings 
that will determine how the unit functions.  To select a tab place the highlight on 
the tab name.  To select a data fi eld on a tab, user the ROCKER Key (up/down) 
to highlight the fi eld then press ENTER.  To restore the GPSMAP 76S to the 
factory settings for items on the tab, press MENU and with ‘Restore Defaults’ 
highlighted press ENTER.
Setup Menu — ‘General’ Tab

The ‘General’ Tab contains settings for the Receiver Mode, WAAS, Backlight 

Time Out, and Beeper.  To change a setting highlight the fi eld then press ENTER.  
Make your selection then press ENTER to activate the selection.

Mode — The Mode selections are ‘Normal’, ‘Battery Saver’ and ‘Simulator’

‘Normal’ — Use this setting for best performance.
‘  Battery  Saver’  —  When ‘Battery Saver’ is selected, the receiver is optimized 
to save battery power.  When in the Battery Saver mode you may experi-
ence slower screen updates, but should notice a signifi cant increase in 
battery life.

‘ Simulator’  — When in ‘Simulator’ mode the GPS receiver is turned off and 
the unit simulates satellite reception.  Use the Simulator mode when the 
unit is indoors and you wish to practice with the unit.

190-00249-00_0C.indd   47

5/7/2003, 9:54:56 AM