Siemens gigaset 4110 사용자 설명서
65
Using several handsets
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619
Anlage.fm
4.9.02
Step
by
step
Walk and Talk mode
This function makes communication between handsets (Gigaset 4000
Comfort) possible outside the range of the base. The handsets will not be ac-
cessible for incoming calls in walk and talk mode.
Comfort) possible outside the range of the base. The handsets will not be ac-
cessible for incoming calls in walk and talk mode.
Example:
You are on holiday with friends, and each has a handset with walk and talk
mode activated. This will allow you to communicate with each other free of
charge.
You are on holiday with friends, and each has a handset with walk and talk
mode activated. This will allow you to communicate with each other free of
charge.
Prerequisite for the handsets
Communication will only function between:
●
handsets that are registered on the same base, with both handsets having
selected, for instance, “Base 1”
selected, for instance, “Base 1”
, see page 19;
or
●
handsets that have set “Best Base” as the base selection:
Important: All “other people’s” handsets that are also within range and
have had walk and talk mode set with “Best Base” as the base selection will
also be called;
Important: All “other people’s” handsets that are also within range and
have had walk and talk mode set with “Best Base” as the base selection will
also be called;
or
●
handsets that are not registered:
Important: All “other people’s” handsets that are also within range, have
had walk and talk mode set and are not registered on a base will also be
called.
Important: All “other people’s” handsets that are also within range, have
had walk and talk mode set and are not registered on a base will also be
called.
The maximum range between handsets operated in walk and talk mode is 300
metres. The operating time of the handsets will be considerably reduced.
metres. The operating time of the handsets will be considerably reduced.
Activating walk and talk mode on the handset
Use [
|
] to open the menu.
Select using
' and [OK ]:
Add. Features
.
Select using [OK ]:
Walk and Talk
Activate walk and talk mode.
The walk and talk mode can be switched off with the display key
Off
.
Using walk and talk mode
Two handsets are in walk and talk mode:
Calling handset:
Press [Call].
Called handset:
The call is signalled on the display with a message.
[SILENT ] deactivate ringer.
Press
!
.
The two handsets are connected.
Night service
Night service allows you to set up time-controlled call forwarding so that calls
are redirected from the office to a private line after business hours, for instance.
Just as in the case of call forwarding to an external destination, with night serv-
ice the only MSNs that can be redirected are those the relevant handset has as
the receive MSN. If night service has already been activated it will have to be
deactivated in order the change the forwarding destination.
are redirected from the office to a private line after business hours, for instance.
Just as in the case of call forwarding to an external destination, with night serv-
ice the only MSNs that can be redirected are those the relevant handset has as
the receive MSN. If night service has already been activated it will have to be
deactivated in order the change the forwarding destination.
Info
1.
2.
3.