Edelbrock 1403-1413 사용자 설명서

Edelbrock Performer Series Carburetor Owner’s Manual 12/01

Step 1  Select the combination of Cruise Mode and Power Mode fuel-metering stages

desired for your calibration. Normal calibration changes will be within the gridded
diagonal area. That is, Cruise and Power mode changes should be in the same
direction (either richer or leaner) and usually by the same amount.

Step 2  Find the number that is nearest your desired combination. This is your Calibration

Reference Number.

Step 3  Go to the next page. Find the Calibration Reference Number you have just selected

in Step 2. Listed will be the Main Jet and Metering Rod required to achieve the
desired fuel metering for the Primaries.

1

2

25

Power Mode: Low Vacuum/High Power-Rod Up

3 stages 

Lean (12%)

2 stages 

Lean (8%)

1 stage 

Lean (4%)

Base 

Power  

Mode

1 stage 

Rich (4%)

2 stages 

Rich (8%)

3 stages 

Rich (12%)

3 stages 

Rich (12%)

2 stages 

Rich (8%)

1 stage 

Rich (4%)

1 stage 

Lean (4%)

2 stages 

Lean (8%)

3 stages 

Lean (12%)

Base 

Power  

Mode

 High 

V

acuum/Low Power

-Rod Down

3

4

5

6

7

8

9

10

12

13

14

15

16

11

17

18

19

20

21

22

23

24

26

27

1

#

#

Stock Calibration

Numbers in black are the steps obtainable using Calibration Kit #1486 plus
the stock jets and metering rods.

Numbers in white are the steps obtainable using jet and rod combinations
shown on the following page.

1403-1413 Perf Series Carburetor Owner's Manual.qxd  3/31/2006  12:04 PM  Page 18