Epson GT-10000 사용자 설명서
4-2
Maintenance and Troubleshooting
R4C345
Rev. C
Rev. C
A5 size
CHAP4.FM
10/7/99
Pass 0
L
Proof Sign-off:
<tantoname>
<tantoname>
SEI K.Ito M.Fujimori
<leadername>
M.Fujimori
<editorname>
SEI G.Hildebrand
Maintenance
Cleaning the scanner
To keep your scanner operating at its best, you should clean it
periodically, as described below:
periodically, as described below:
1. Turn the scanner off and unplug the power cord.
2. Clean the outer case with a cloth dampened with mild
detergent and water. Remove any remaining moisture with a
soft dry cloth.
soft dry cloth.
3. If the document table glass becomes dirty, clean it with a soft
dry cloth. If the glass is stained with grease or does not come
clean with a dry cloth, use a small amount of glass cleaner
and a soft cloth to remove it. Wipe off any remaining liquid.
clean with a dry cloth, use a small amount of glass cleaner
and a soft cloth to remove it. Wipe off any remaining liquid.
Always be sure that there is no dust on the document table glass.
Dust can cause white spots in your scanned image.
Dust can cause white spots in your scanned image.
w
Caution:
❏
❏
Be careful not to scratch or damage the document table glass,
and do not use a hard or abrasive brush to clean it. A damaged
glass surface can permanently reduce scanning quality.
and do not use a hard or abrasive brush to clean it. A damaged
glass surface can permanently reduce scanning quality.
❏
Never use alcohol, paint thinner, or corrosive solvents to
clean the scanner. These chemicals can damage the scanner
components as well as the case.
clean the scanner. These chemicals can damage the scanner
components as well as the case.
❏
Be careful not to spill liquid into the scanner mechanism or
electronic components. This could permanently damage the
mechanism and circuitry.
electronic components. This could permanently damage the
mechanism and circuitry.
❏
Do not spray lubricants inside the scanner.
❏
Never open the scanner case.