Epson V4.10 사용자 설명서

Operating environment

Compatible computers

Macintosh computers cannot be used.

* Operations carried out at the computer may become slow depending on the

number of projectors being managed. If this happens, use a computer with
higher specifications.

* EMP Monitor cannot be used in environments which do not allow pings to

be transmitted.

Installing EMP Monitor

If using Windows 2000, NT4.0 or XP, the computer must be started up in
Administrator mode.

PROCEDURE

Turn the computer on, and quit all running
applications.

Place the "EPSON Projector Software for Monitoring"
CD-ROM in the computer's CD-ROM drive.

The installer automatically starts up.

From here, continue with the installation by following
the on-screen messages.

Before starting operations

Check the following points before starting up EMP Monitor.
• EMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.
• If using Windows 2000, NT4.0 or XP, the computer must be started up in

Administrator mode.

When using EMP-6000/821/81/61
• A commercially-available serial

⇔ TCP/IP conversion adapter and a

connection cable are required in order to use EMP Monitor.
s"Standby mode" in the projector's User's Guide

• Make the settings for the serial

⇔ TCP/IP conversion adapter before

connecting to the projector.

98SE/Me/NT4.0/2000 Professional/XP Home Edition/XP
Professional
• Internet Explorer Ver. 5.0 or later must be installed.

CPU

Pentium MMX 166 MHz or higher (Pentium II 233 MHz
or higher recommended)

Memory
capacity

64 MB or more (128 MB or more recommended)

Free hard disk
space

50 MB or more

Display

SVGA (800

× 600) or higher resolution, 32 bit or higher

display colour