Epson Stylus Photo R340 사용자 설명서

INK.FM

A4 size

7/8/05

R

Proof Sign-off:
K.Yoda CRE Takehira
M. Otsuka
editor name

You can check the ink supply in the right bottom on 
LCD panel as an icon. 

To check the details, do the following: 

1.

Press the q Setup button, press the 

u

 or d button 

to highlight Ink Levels, then press the r button. 

You see a graphic showing the amount of ink 
available in each cartridge.

B (Black) C (Cyan), LC (Light Cyan), M (Magenta), 
LM (Light Magenta), and Y (Yellow).

When your ink starts getting low, this mark 

 is 

displayed.

2.

Press the OK button to return to the previous 
screen once you have checked the ink levels.

When your ink starts getting low, make sure you have 
replacement cartridges available. You can not print if 
a cartridge is empty.

Read all of the instructions in this section before 
replacing the ink cartridges.

w

If ink gets on your hands, wash them thoroughly with soap and water. 
If ink gets in your eyes, flush them immediately with water. If you still 
have discomfort or vision problems, see a doctor immediately.

c

❏ To avoid damaging the printer, never move the print head by 

hand.

❏ When an ink cartridge is empty, you cannot continue printing 

even if the other cartridges still contain ink. 

❏ Leave the empty cartridge installed in the printer until you have 

obtained a replacement. Otherwise the ink remaining in the print 
head nozzles may dry out.

❏ An IC chip on each ink cartridge accurately monitors the amount 

of ink used from the cartridge. Even if a cartridge is removed and 
then inserted again, all of its ink can be used. However, some 
ink is consumed each time the cartridge is inserted because the  
automatically checks its reliability.

❏ Epson recommends the use of genuine Epson ink cartridges. 

Other products not manufactured by Epson may cause printer 
damage that is not covered by Epson's warranties, and under 
certain circumstances, may cause erratic printer behavior.

1.

Make sure that the printer is on but not printing, 
then open the printer cover.

Make sure the CD/DVD tray is not inserted in the printer before 
you replace the ink cartridge.

2.

Check that the message “Ink out” is displayed on 
the LCD panel and press the OK button. 

The message is not displayed if there is some ink left. In this 
case, press the 

q

 Setup button, select Ink Cartridge 

Replacement, then press the r button. Next, press the OK 
button. To find out which cartridge requires replacing, see 
“Checking the ink supply” on page 23.

The ink cartridge moves slowly to the replacement 
position.

c

Do not move the print head by hand, as this may damage the 
printer. Always press the OK button to move it.