Epson Stylus Photo R340 사용자 설명서
R4CG230
BasicOperationGuide Rev.D
BasicOperationGuide Rev.D
TRBLE.FM
A4 size
7/8/05
R
Proof Sign-off:
K.Yoda CRE Takehira
M. Otsuka
editor name
K.Yoda CRE Takehira
M. Otsuka
editor name
Troubleshooting
27
En
g
lis
h
Troubleshooting
If you have a problem with your printer, check the
messages on the LCD panel screen.
messages on the LCD panel screen.
Error Messages
You can diagnose and solve most problems by
checking the error messages on the LCD screen. If you
cannot solve the problems by checking the messages,
use the following table and try the recommended
solution.
checking the error messages on the LCD screen. If you
cannot solve the problems by checking the messages,
use the following table and try the recommended
solution.
Note:
The solutions are for the problems that happen when using this
product.
product.
Print Quality Problems
You see banding (light lines) in your
printouts or copies.
printouts or copies.
■
Make sure that the printable side of the paper is
face up in the sheet feeder. Run the Head Cleaning
utility to clear any clogged ink nozzles.
&
face up in the sheet feeder. Run the Head Cleaning
utility to clear any clogged ink nozzles.
&
See “Cleaning the print head” on page 25
■
Run the Print Head Alignment utility.
&
&
See “Aligning the print head” on page 25
■
Use up ink cartridges within six months after
opening their packages.
opening their packages.
■
Check the LCD panel. If the ink low message is
displayed, replace the appropriate ink cartridge.
&
displayed, replace the appropriate ink cartridge.
&
See “Replacing Ink Cartridges” on page 23
■
Make sure that the Paper Type selected on the
LCD panel is appropriate for the type of media
loaded in the printer.
LCD panel is appropriate for the type of media
loaded in the printer.
Your printout is faint or has gaps.
■
Make sure that the printable side of the paper is
face up in the sheet feeder.
face up in the sheet feeder.
■
When you set the Quality setting on the Print
Setting menu to High or Normal, set the
Bidirectional setting to Off. Bidirectional printing
decreases print quality.
Setting menu to High or Normal, set the
Bidirectional setting to Off. Bidirectional printing
decreases print quality.
■
Run the Head Cleaning utility to clear any clogged
ink nozzles.
&
ink nozzles.
&
See “Cleaning the print head” on page 25
■
Run the Print Head Alignment utility.
&
&
See “Aligning the print head” on page 25
■
Make sure that the Paper Type selected on the
LCD panel is appropriate for the type of media
loaded in the printer.
LCD panel is appropriate for the type of media
loaded in the printer.
■
The ink cartridge may be old or low on ink.
&
&
See “Replacing Ink Cartridges” on page 23
You see wrong or missing colors.
■
Run the Head Cleaning utility.
&
&
See “Cleaning the print head” on page 25
Error Messages
Solution
No memory card or disk
inserted, or it cannot be
recognized.
inserted, or it cannot be
recognized.
Make sure the memory card
or storage disk has been
inserted correctly. If so,
check to see if there is a
problem with the card or
disk and try again. Make
sure the card or disk
contains images.
or storage disk has been
inserted correctly. If so,
check to see if there is a
problem with the card or
disk and try again. Make
sure the card or disk
contains images.
Cannot recognize the memory
card or disk.
card or disk.
Make sure the memory card
or storage disk has been
inserted correctly. If so,
check to see if there is a
problem with the card or
disk and try again.
or storage disk has been
inserted correctly. If so,
check to see if there is a
problem with the card or
disk and try again.
Cannot recognize the device.
Make sure the memory card
has been inserted correctly.
If you connected a USB
device, make sure the disk
has been inserted correctly.
has been inserted correctly.
If you connected a USB
device, make sure the disk
has been inserted correctly.
Printer error occurred. Please
see your manual.
see your manual.
Turn the printer off and then
back on. If the error
message still appears,
contact your dealer.
back on. If the error
message still appears,
contact your dealer.
Service required. See your
manual for details.
manual for details.
Contact your dealer.
Cannot perform the print head
cleaning due to low ink level.
cleaning due to low ink level.
You need enough ink to
perform print head cleaning.
Replace the ink cartridge
that is low.
perform print head cleaning.
Replace the ink cartridge
that is low.