Siemens gigaset c450 ip 사용자 설명서

다운로드
페이지 32
6
First Steps
Gigaset C450 IP  KBA / IM-Nord EN / A31008-M1713-R201-1-7643 / starting.fm / 01.03.2006
Ve
rs
ion 4,
 16
.09.
2005
Initial charging and discharging of 
batteries
Battery charging is indicated in the top 
right of the display by a flashing battery 
icon 
e, V or U. During handset 
operation, the battery icon indicates the 
charge status of the batteries (page 1).
The correct charge status can only be dis-
played when the batteries are first fully 
charged and discharged through use. 
¤
To do this, leave the handset in the 
charging cradle without interruption 
until the battery icon stops flashing in 
the display (approx. 13 hours). 
¤
Once the batteries are fully charged, 
remove the handset from the charging 
cradle and do not put it back again until 
the batteries are fully discharged. 
Please note:
u Always repeat the charging and dis-
charging procedure if you remove the 
batteries from the handset and insert 
them in again.
u The batteries may warm up as they are 
charging. This is not dangerous.
u After a while the charge capacity of the 
batteries will decrease for technical rea-
sons.
Setting the date and time
§Menu§
 
¢
Settings 
¢
Date/Time
~
Enter the day, month and year 
with 6 digits and press 
§OK§
. Use 
q to move between the fields.
~
Enter hours and minutes with 
4 digits (e.g. 0 7 1 5 for 07.15 
hrs) and press 
§OK§
. Use 
q to 
move between the fields.
The date and time are shown in the hand-
set's idle display (page 1).
Registering the handset to the base 
station 
Your handset is registered to the base sta-
tion by default. 
For how to register other handsets to the 
base station and make internal calls free of 
charge, please see the full user guide 
Installing the base station
The base station is designed for use in 
closed, dry rooms with a temperature 
range of +5 °C to +45 °C. 
¤
Install/hang your base station at a cen-
tral point in the house.
Mounting the base station on a wall
Please note: 
u Never expose the telephone to heat 
sources, direct sunlight or other electri-
cal appliances.
u Protect your Gigaset from moisture, 
dust, corrosive liquids and vapours.
Note:
After the first battery charge and discharge, 
you may replace your handset in the charging 
cradle after every call.