Epson powerlite 1700c 사용자 설명서
10
Welcome
Unpacking the Projector
After unpacking the projector, make sure you have all the parts shown
below:
below:
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use the carrying case. See page 11 for ordering information, and
page 64 for transportation instructions.
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use the carrying case. See page 11 for ordering information, and
page 64 for transportation instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
additional components:
■
To receive an S-Video signal, you’ll need an S-Video cable. One
may be provided with your video equipment, or you can purchase
one from Epson; see page 11.
may be provided with your video equipment, or you can purchase
one from Epson; see page 11.
■
To receive a component video signal from a VCR or other video
device, you’ll need an HD15 to component video cable. You can
purchase one from Epson; see below.
device, you’ll need an HD15 to component video cable. You can
purchase one from Epson; see below.
Projector
Remote control and
2 AAA batteries
Power cable
VGA computer cable
Audio adapter
Carrying case
PDF manual and
registration CD-ROM