Epson powerlite 1700c 사용자 설명서

3. Press the red P

Power

 button on the remote control or on top of 

the projector. 

The projector beeps once and the 

Power

 light flashes green as the 

projector warms up, then an image begins to appear. When the 

Power

 light stops flashing and remains green, the projector is 

ready for use.  

4. If you’ve connected a Windows-based computer to the projector, 

you may see a New Hardware Wizard screen saying your 
computer has found a plug-and-play monitor; if so, click 

Cancel

. 

5. If you are prompted to enter a password, see page 50.

Selecting the image source lets you switch between images input from 
different pieces of connected equipment (such as a computer or DVD 
player).  

If you don’t see the image you want, press the 

Source Search

 button 

on the projector or the 

Search

 button on the remote control until 

you see the image you want to project. 

You can also use the 

Source

 buttons on the remote control to switch 

between devices connected to the ports identified on each button.. 
The PowerLite 1700c/1710c does not support EasyMP.

TM

 

To focus and adjust the 
image, see page 20. If a 
projected image fails to 
appear, see page 18 for help.