Epson powerlite 1700c 사용자 설명서

Connecting to Computers and Other Equipment

Connecting a Component Video Source

You will need a component-to-VGA video cable or a component
video-to-VGA adapter for this connection. You can order this cable
(ELPKC19) from Epson; see page 11 for more information.

1. Locate a component-to-VGA video cable or adapter.

2. Connect the cable to your player and the blue

Computer/Component Video

connector on the projector.

3. If you want to play sound through the projector, see page 40 for

instructions on connecting audio cables.

4. If you don’t need to make any other connections, see page 15 for

instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the

button on the remote control or press the

Source

button on the projector’s control panel repeatedly until

the image appears.

note

Be sure your video player is
not an RGB video source.
If you select the wrong
source, image quality may
suffer. Check your video
player’s documentation.

Also, make sure the
Computer Input setting in
the Signal menu is set to
Auto or Component Video
(see page 48).

Component-to-VGA cable

Component-to-
VGA adapter