Siemens S7 사용자 설명서

73

SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06

This chapter explains the following:

S

How to send and receive data.

S

Which data areas can be used on the S7 CPU.

S

How to program the SEND/RECEIVE interface in the user program.

You will find further information in the following sources:

S

For programming and configuring nodes for connections (for example a
SIMATIC S5 PLC with the CP 1430 TCP, PC with CP 1413), please refer to the
appropriate manuals.

S

The FCs for programming  connections are described in Section 5.3.

S

Configuring the Ethernet CP with NCM S7 is described in Chapter 4.

Sample programs:

Sample configurations and programs are available for the SEND/RECEIVE
interface described here:

S

In the sample project PROJECT_ETHERNET that you can start immediately
after installing NCM S7; for a description, refer to the Primer /2/.

S

On the Internet as downloadable sample projects; refer to the information in
Appendix C “Support and Training”.

The Quick Start CD that can be ordered separately is a
treasure-trove of sample programs and configurations.

You can order this directly on the Internet at:

online_zugreifen.htm