Allied Telesis AT-8000S 사용자 설명서

Page 176

  

A user name is used to manage the device remotely, for example through SSH, Telnet, or the Web interface. To 
gain complete administrative (super-user) control over the device, the highest privilege (15) must be specified.

Note

Only an administrator (super-user) with the highest privilege level (15) is allowed to manage the device 
through the Web browser interface.

For more information about the privilege level, see the CLI Reference Guide.

The configured user name is entered as a login name for remote management sessions. To configure user name 
and privilege level, enter the command at the system prompt as shown in the configuration example:

For this explanation, the following parameters are going to be used:

TFTP Server — 172.16.101.101

System software file — file1

Boot file — file 2

To download software an a standalone device perform the following:

1.

Power up the device as described in the Allied Telesis AT-8000S Installation Guide. The CLI command 
prompt is displayed.

2.

Enter the copy command to download the boot file.

Console> enable

Console# configure

Console(config)# username admin password lee privilege 15

Console#

Console# copy tftp://172.16.101.101/file2.rfb boot

Accessing file 'file2' on 172.16.101.101...

Loading file1 from 172.16.101.101: 

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

09-Jul-2006 03:15:21 %COPY-W-TRAP: The copy operation was completed successfully

!

Copy: 3329361 bytes copied in 00:03:00 [hh:mm:ss]