Epson PowerLite 1735W 사용자 설명서
50
Changing Settings Using a Web Browser (Web Control)
You can set up and control the projector from a computer by using the
Web browser of a computer that is connected to the projector via a
network. Setup and control operations can be performed remotely if
this function is used. In addition, since you can use the computers
keyboard, entering characters required for the setup is easier.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If
using a Macintosh, you can also use Safari.
If, however, you are using Safari under Macintosh 10.2.8, some of the
Web control radio buttons may not display properly.
Web browser of a computer that is connected to the projector via a
network. Setup and control operations can be performed remotely if
this function is used. In addition, since you can use the computers
keyboard, entering characters required for the setup is easier.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If
using a Macintosh, you can also use Safari.
If, however, you are using Safari under Macintosh 10.2.8, some of the
Web control radio buttons may not display properly.
Displaying Web Control
Display Web control with the following procedure.
f
Entering the IP address of the projector
Web control can be opened by specifying the IP address of the projector
as follows when using "Advanced Connection Mode".
as follows when using "Advanced Connection Mode".
A
Start the Web browser on the computer.
B
Enter the IP address of the projector in the address
input box of the Web browser, and press the [Enter]
key on the computer's keyboard.
input box of the Web browser, and press the [Enter]
key on the computer's keyboard.
Web Control is displayed. If you have set a Web Control password
in the projector, you will be asked to enter a user name and
password. Enter EPSONWEB for the user name.
in the projector, you will be asked to enter a user name and
password. Enter EPSONWEB for the user name.
Projector Setup
You can set items that are usually set in the projector's configuration
menu. The items available in Web Control are the same, with the
exceptions noted below.
menu. The items available in Web Control are the same, with the
exceptions noted below.
f
Items in the configuration menu that cannot be set by the
web browser
web browser
All items in the configuration menu can be set with the exception of the
following items.
• "Settings" - "Pointer Shape"
• "Settings" - "User Button"
• Registering a user's logo using "Extended" - "User's Logo"
• "Extended" - "Operation" - "High Altitude Mode"
• "Extended" - "Link21", "Language"
• "Reset" - "Reset All", "Reset Lamp Hours"
following items.
• "Settings" - "Pointer Shape"
• "Settings" - "User Button"
• Registering a user's logo using "Extended" - "User's Logo"
• "Extended" - "Operation" - "High Altitude Mode"
• "Extended" - "Link21", "Language"
• "Reset" - "Reset All", "Reset Lamp Hours"
Additionally, the MAC Address is not displayed in Web Control.
q
Setup and control with a Web browser are possible if set to
"Network On" from the "Extended" menu of the
projector's configuration menu, even if the projector is in
standby mode (when the power is off).
"Network On" from the "Extended" menu of the
projector's configuration menu, even if the projector is in
standby mode (when the power is off).
q
If your Web browser is set up to connect via a proxy server,
Web control cannot be displayed. To use the Web control,
you need to make network connection settings with a
different method than a proxy server.
Web control cannot be displayed. To use the Web control,
you need to make network connection settings with a
different method than a proxy server.
Procedure