Epson PowerLite 1735W 사용자 설명서
7
Connecting with Quick Wireless Connection
You can use the supplied Quick Wireless Connection USB key (hereafter "USB key") to project images from a connected Windows computer.
This function is called Quick Wireless Connection. You can quickly project images by connecting the USB key to the computer. Software
requirements are listed in the appendix.
This function is called Quick Wireless Connection. You can quickly project images by connecting the USB key to the computer. Software
requirements are listed in the appendix.
Preparing the USB key
(only when the supplied "Wireless LAN unit" is installed)
(only when the supplied "Wireless LAN unit" is installed)
To project computer images, start with storing the projector information in the USB key. Then connect the USB key to the computer.
Procedure
Connect the power cable
(supplied accessory).
(supplied accessory).
Turn on the projector.
Slide open the A/V
mute slide.
mute slide.
Connect the USB key.
Using the
control panel
Using the
remote control
Pee!
Saving data
Orange
Data saved
Green
Write error
Red
Reading the access indicators
Install the wireless LAN
unit.
unit.
See "Quick Start Guide" for
how to install.
how to install.
When data is saved, and then a message is displayed
on the projection screen, remove the USB key.
on the projection screen, remove the USB key.
q
You can also run Quick Wireless Connection in the
following network settings.
• The "Wireless LAN unit" is installed and
following network settings.
• The "Wireless LAN unit" is installed and
connected to a wireless LAN access point on the
network.
network.
• The optional "Ethernet unit" is installed and
connected to the network by wired LAN.