Siemens CF75 사용자 설명서

© Siemens AG 2004, E:\Auftrag

\Siemens\MobilePhones

\CF75 Ad

onis\en\LA\ADONIS_Startup.fm

Template:

 X75, Version 2.

2; VAR Language: en; VAR issue date:

 050524

 of CF75 Adonis FUG en, A31008-H6010-A1-1-7619 (14.06.2005, 14:53)

The battery is not fully charged 

when delivered. Plug charger cable 

into the bottom of the phone, plug 

power supply unit into a mains pow-

er socket and charge for at least two 

.

Y

Display during charging.

An empty battery is fully charged after 

about 2 hours. Charging is only possi-

ble within a temperature range of 

+5 °C to 45 °C. If the temperature rises/

falls 5 °C above/below this, the charge 

symbol flashes a warning. The mains 

voltage specified on the power sup-

ply unit must not be exceeded.

The operating time depends upon 

the respective conditions of use. Ex-

treme temperatures considerably re-

duce the phone’s standby time. 

Avoid placing the phone in the sun 

or on a heater.
Call time: 100 to 330 minutes

Stand-by time: 60 to 275 hours

If the battery has been discharged 

fully, the charge icon is not immedi-

ately visible when the power supply 

is plugged in. It will appear after up 

to two hours. In this case the battery 

is fully charged after 3 to 4 hours.
Only use the plug-in power supply 

Charge level display during opera-

tion (empty–full):

V

 

W

 

X

 

A beep sounds when the battery is 

nearly empty. The charge level of the 

battery is only displayed correctly af-

ter an uninterrupted charging/dis-

charging cycle. You should therefore 

 

and where possible not finish the 

Additional information
The power supply unit heats up when used 

for long periods. This is normal and not 

dangerous.
If the battery is removed for longer than 

30 seconds, the clock must be reset.