Epson emp 800 사용자 설명서

If your printed image is unexpectedly light or faint, or dots are 
missing from the image, you may need to clean the print heads. 
This unclogs the nozzles so they can deliver ink properly.

Cleaning the print heads uses ink, so clean them only if print 
quality declines. You can clean the print heads in either of the 
following two ways:

◗

With the Head Cleaning utility in your printer software 
(when the printer is on a local port rather than a network)

◗

Using the printer’s control panel buttons

Follow these steps to run the utility from a Windows computer 
or a Macintosh:

1. Make sure the printer is turned on but not printing, and  

the B black and A color ink out lights are off.

2. Access the main printer settings dialog box as described in 

Chapter 1.

3. Click the 

Utility

 tab (Windows) or the 

Utility

 button 

(Macintosh). You see the Utility menu.

4. Click the 

Head Cleaning

 icon.

5. Follow the instructions on the screen to clean one or 

both print heads. Cleaning each head takes about two 
minutes, during which the printer makes some noise and 
the Ppower light flashes. 

When the power light stops flashing, you need to run a 
nozzle check.

Caution:
Never turn off the printer 
while the P

 

power light is 

flashing.

easch5.fm5  Page 6  Monday, November 25, 1996  4:43 PM