Epson emp 800 사용자 설명서

If you want to move your printer some distance, you need to 
prepare it for transportation and repack it in the original box. 
Follow these steps:

1. Turn on the printer and wait until the print heads lock in 

the far right position. Then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then 

disconnect the interface cable from the printer.

3. Remove any paper from the sheet feeder and remove the 

paper support.

4. Push in the output tray extensions and close the tray.

5. Repack the printer and attachments in the original box 

using the protective materials that came with it. See the 
Notice Sheet that was packed with the printer.

Be sure to keep the printer flat as you transport it. If you notice 
a decline in print quality after transporting the printer, clean the 
print heads; if output is misaligned, align the print heads. See 
the instructions in this chapter.

Caution:
To avoid damage, 
always leave the ink 
cartridges installed 
when transporting the 
printer.

easch5.fm5  Page 11  Monday, November 25, 1996  4:43 PM