Epson emp 800 사용자 설명서

All the lights are flashing.

The printer has finished charging the ink cartridge, but the  

P

 power 

light is still flashing.

The printer software installed with Windows 3.1 doesn’t work 
correctly after you upgrade to Windows 95.

After you install your printing software, you see the Windows 95 New 
Hardware found window.

You haven’t removed all the 
packing material from the 
printer.

Remove the packing material, following the instructions on the 
notice sheet in the box. If the printer still doesn’t print, contact 
EPSON as described in the Introduction.

An internal error has 
occurred.

Turn off your printer, wait a few seconds, and turn it on again. If 
the lights still flash or stay on, contact EPSON as described in the 
Introduction.

The ink cartridge clamp 
isn’t locked down.

Press down on the clamp to lock it.

Packing material remains in 
the carriage.

Remove all packing material, following the instructions on the 
notice sheet.

The printer needs to 
initialize.

If the printer is not moving or making noise, but the light is still 
flashing for more than 5 minutes, turn the printer off. If the light is 
still flashing when you turn it back on, contact EPSON as described 
in the Introduction.

Your printer software is not 
set up correctly for 
Windows 95.

Reinstall the printer software after installing Windows 95.

An operating system error 
has occurred.

Click 

Do not install a driver

, and then click 

OK

.

easch6.fm5  Page 10  Tuesday, January 14, 1997  9:48 AM