Epson EMP-7900 사용자 설명서

After you have assigned an IP address to the network interface using the 
printer’s control panel, EpsonNet Config, or a DHCP server, you can configure 
the network interface using EpsonNet Config with Web Browser.

Note:
❏ A Web browser must be installed on your computer.

❏ TCP/IP must be correctly set for the computer and the network interface.

Follow the steps below to change the IP address using EpsonNet Config.

1. Turn on your printer.

2. Run EpsonNet Config in one of the following ways.

❏ Run EpsonNet Config for Windows or Macintosh. Select the printer you 

want to configure from the list and then click 

Launch Browser.

❏ Open your browser, and then type in the IP address of the network 

interface directly. Do not run EpsonNet Config for Windows or 
Macintosh.

http://IP address of network interface/

Example: 

Note:
To check the IP address of the network interface, use EpsonNet Config. See 
“About EpsonNet Config” on page 29 for Windows users, or see “About EpsonNet 
Config” on page 30 for Macintosh users for details.You can also print a Network 
Status Sheet from the printer’s control panel. See “Printing a Network Status 
Sheet” on page 18 for instructions.

3. Click 

TCP/IP under Network on the Configuration menu to display the 

TCP/IP setting screen.

4. Select a method for acquiring the IP address. When you select 

Auto, 

DHCP becomes available and assigns an IP address automatically. If you 
want to set the IP address manually, select 

Manual.