Siemens Gigaset M49AM 사용자 설명서

23

This function is applicable for 2 registered handsets to talk to an 
external caller. 
When one handset answers the call, press the INT key, and you will 
see “Line on Hold Extension?” on the display. Then press the number 
of the other handset. 
Then the paged handset will ring; you can press the INT key to talk to 
the paging handset. If the paged handset is not willing to answer the 
incoming call, simply press the End key to end the intercom.) 
During inter-talking, press the Talk/Flash-out key on the paging 
handset to enter Three-Party Conference mode, and “Conference” will 
appear on the display of both handsets. 
Note: The paging ring will last for 2 minutes. After 2 minutes, if the 
other handset does not answer, the ring will stop. “No Answer” will be 
displayed on the display of the paging handset and this handset will 
resume talking to the caller. 
Or
When the first handset is talking to an external caller, users can press 
the Talk key on the other handsets to enter the conference. 

The answering machine must be turned on to work automatically. 

Press once the On/Off key to activate the answering machine. Then 
the phone will indicate “Answering function activated” and the 
indicator will light. 
Press the same key again to deactivate the answering machine. Then 
the phone will indicate “Answering function deactivated” and the 
indicator will be off. 

Press down the Owner Message/ Record key, when you hear beep and 
the answering machine is in Recording mode. Now, you can record 
your message. Release the key to end recording and play the message. 
Press once the Owner Message/ Record key to play the recorded 
message, and press the Stop key to end play. 
Note: The message is no longer than 2 minutes. 

䮾ᮁ

䮾ᮁ