Epson EMP-53 사용자 설명서
35
Adjusting the Image Quality
The quality of the screen images can be adjusted as follows.
Adjusting Computer Images
Automatic setup detects the status of the signals coming from the
connected computer, and automatically adjusts these signals so that the
optimum images can be obtained. It involves adjustment of the following
three items: optimum images can be obtained. It involves adjustment of the
following three items:
connected computer, and automatically adjusts these signals so that the
optimum images can be obtained. It involves adjustment of the following
three items: optimum images can be obtained. It involves adjustment of the
following three items:
, Position and
.
Automatic Setup
TIP
• If "Auto Setup" in the "Video" menu is set to "OFF" (the default
setting for this item is "ON"), automatic setup is not carried out. If
you press the [Auto] button on the remote control while computer
signals are being projected, adjustment will then be carried out.
you press the [Auto] button on the remote control while computer
signals are being projected, adjustment will then be carried out.
• If you press the [Auto] button while the E-Zoom or Freeze function is
being used or while a configuration menu or help menu is being
displayed, the function will be cancelled when you press the [Auto]
button, and then the adjustment will be carried out.
displayed, the function will be cancelled when you press the [Auto]
button, and then the adjustment will be carried out.
• Sometimes the signals may not be adjusted correctly depending on
the type of signals being output by the computer. In such cases, use
the configuration menu commands to adjust the tracking and sync
settings manually.
the configuration menu commands to adjust the tracking and sync
settings manually.
ESC
Auto
Enter
Remote control