Epson 9300i 사용자 설명서

6. Loosen the three screws holding the lamp in place (you can’t remove them).

7. Grasp the wire handle and pull the lamp straight out.

Caution: Avoid touching the glass portion of the lamp. Oils transferred from your hands can cause the lamp to
overheat and fail prematurely.

8. Hold the shutter open, and use a vacuum cleaner to remove any dust from the wire mesh filters

inside.

9. Insert the lamp back into the projector, tighten its screws, and replace the lamp cover.

Epson is a registered trademark of SEIKO EPSON CORPORATION.

PowerLite is a registered trademark of Epson America, Inc.

CPD-17590