Adam Equipment p.n. 6242 revision a7 사용자 설명서
© Adam Equipment Company 2007
•
When the container is removed a negative value will be shown. If
the scale was tared just before removing the container this value
is the gross weight of the container plus all products those were
removed. The zero indicator will also be ON because the platform
is back to the same condition as it was when the [Tare/Zero] key
was last pressed.
the scale was tared just before removing the container this value
is the gross weight of the container plus all products those were
removed. The zero indicator will also be ON because the platform
is back to the same condition as it was when the [Tare/Zero] key
was last pressed.
Second method of entering a tare value:
•
This method allows you to enter a value for the tare weight from
the keypad. This is useful if all containers are the same or if the
container is already full but the net weight is required and the
weight of the container is known.
the keypad. This is useful if all containers are the same or if the
container is already full but the net weight is required and the
weight of the container is known.
•
Remove all weights from the platform, press the [Tare/Zero] key
to zero the display.
to zero the display.
•
Enter the value for the Tare weight including decimal point using
the keypad, press [Tare/Zero] to store the tare value. The weight
will show a negative value equal to the tare.
the keypad, press [Tare/Zero] to store the tare value. The weight
will show a negative value equal to the tare.
•
Place the container on the platform.
•
The display will then show the weight of the container minus the
tare weight. When the full container is placed on the platform the
tare value will be subtracted from the gross weight displaying only
the net weight of the contents.
tare weight. When the full container is placed on the platform the
tare value will be subtracted from the gross weight displaying only
the net weight of the contents.
•
If the value input is not consistent with the increment of the scale,
the scale will round the tare value to the nearest value possible.
For example, if a tare value of 103g is entered into the 60Kg scale
with 5g readability, then the display will show -105g.
the scale will round the tare value to the nearest value possible.
For example, if a tare value of 103g is entered into the 60Kg scale
with 5g readability, then the display will show -105g.
•
The tare value for each scale is held in memory so that they are
not lost when the active scale changes.
not lost when the active scale changes.