Simplicity Manufacturing ei75246 사용자 설명서

TP 300-5196-00-IS-SN

6/2006

• Read, understand, and follow all instructions in the

manual and on the unit before starting.

• Only allow responsible adults, who are familiar with

the instructions, to operate the unit (local regulations
can restrict operator age).

• Clear the area of objects such as rocks, toys, wire,

etc., which could be picked up and thrown.

• Be sure the area is clear of other people. Stop unit if

anyone enters the area.

• Always look down and behind before and while trav-

elling in reverse.

• Be aware of the discharge direction and do not point

it at anyone. Do not point the discharge at glass
enclosures, automobiles, or windows. 

• Disengage all clutches (release drive and auger con-

trol levers) before starting the engine.

• Never leave a running unit unattended. Always disen-

gage the auger and traction controls, stop engine,
and remove keys.

• Stop engine before unclogging chute.
• Operate only in daylight or good artificial light.
• Do not operate the unit while under the influence of

alcohol or drugs.

• Watch for traffic when operating near or crossing

roadways.

• Use extra care when loading or unloading the unit

into a trailer or truck.

• Keep in mind the operator is responsible for acci-

dents occurring to other people or property.

• Data indicates that operators, age 60 years and

above, are involved in a large percentage of power
equipment-related injuries.  These operators should
evaluate their ability to operate the unit safely enough

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control 
of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.
The triangle         in text signifies important cautions or warnings which must be followed.

• See your authorized dealer for recommendations

counterweights to improve stability. 

• Travel up and down slopes, not across.
• Remove obstacles such as rocks, tree limbs, etc.
• Watch for holes, ruts, or bumps. Uneven terrain could

overturn the unit. Snow can hide obstacles.

• Use slow speed. Tires may lose traction on slopes.

Choose a low gear so that you will not have to stop or
shift while on the slope. 

• Keep all movement on the slopes slow and gradual.

Do not make sudden changes in speed or direction.

• Always keep unit in gear especially when traveling

downhill.  

• Do not start or stop on a slope. If tires lose traction,

disengage the auger and proceed slowly straight
down the slope.

• Do not turn on slopes unless necessary, and then,

turn slowly and gradually downhill, if possible.

• Do not operate near drop-offs, ditches, or embank-

ments. The unit could suddenly turn over if a wheel is
over the edge of a cliff or ditch, or if an edge caves in.

• Do not operate on wet surfaces. Reduced traction

could cause sliding.

• Do not shift to neutral and coast down hills.

• Engine exhaust from this product contains chemicals

known, in certain quantities, to cause cancer, birth defects,
or other reproductive harm.

• Look for the relevant Emissions Durability Period and Air

Index information on the engine emissions label.

to protect themselves and others from injury.

• All operators should seek and obtain professional

and practical instruction.

• Always wear substantial footwear and appropriate

winter clothing.  Wear foot-ware that improves trac-
tion on slippery slopes.  DO NOT wear long scarves
or loose clothing that could become entangled in
moving parts.  

• Before using, always visually check that all hardware

is present, in-tact, and secure.  Replace worn or
damaged parts.

• Never operate the machine with defective guards, or

without safety protective devises in place.

• Stop engine before: refuelling, removing an attach-

ment, making adjustments (unless the adjustment
can be made from the operator’s position).

• Follow the manufacturer’s recommendation for wheel

weights or counterweights.

• Adjust skid shoe height to clear gravel or crushed

rock surfaces.

• Do not touch snowthrower parts which may be hot

from operation.  Allow such parts to cool before
attempting to service the unit.

CLEARING A CLOGGED DISCHARGE CHUTE
Hand contact with the rotating impeller inside the dis-
charge chute is the most common cause of injury associ-
ated with snowthrowers.  Always use a clean-out tool,
not your hands. to clean out the discharge chute.
To clear the chute:

1. SHUT OFF THE ENGINE.
2. Wait 10 seconds to be sure the impeller blades have

stopped rotating.

3. Always use a clean out tool, not your hands.