Siemens CX203isdn 사용자 설명서

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / during.fm / 14.11.2005

Precondition: CW (Call Waiting) set up, see page 104.
You hear the call waiting tone (short beep) if you receive an external call while 

conducting another call (internal or external). The caller's number or name will appear 

in the display if Calling Line Identification is enabled.
There are four ways to work with call waiting for an external call:
Accept the waiting call – enquiry call:
Press the display key 

ACCEPT

. You answer the call waiting call, and the first call is put on 

hold. Both parties are shown on the display, the current one is marked.

To toggle between both callers see page 29, for a conference call see page 30.
Reject the waiting call
Press the display key 

REJECT

 to reject a call on call waiting.

Forward call waiting internally
You can forward the call waiting call internally without answering the call.

i

If you reject the call waiting tone on your base station, it can still be heard 

on other registered terminals.

a

End your current call. The waiting call becomes a 

normal call.

c

Lift the receiver to answer the call.

i

Open the menu.

s

Select the menu item and confirm.

s

Select and confirm the internal number you want, 

e.g., INT11: Int.11.

The call waiting tone ceases. The call on call waiting 

was successfully forwarded.
Continue the active call.

You continue to hear the call waiting tone. The call 

on call waiting could not be forwarded.

i

Forwarding is only possible to internal users who are not already being 

called.