Siemens Gigaset C450IP 사용자 설명서

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / web_server.fm / 24.9.07

Ver

si

on 4, 16.

09.20

05

¤

Add the voice codecs that your phone 

suggests with outgoing calls to the 

 list. 

Click in the 

 list on the 

voice codec that you want to apply (you 

can mark several entries using the Shift 

key or the Ctrl key). Click on the 

 

button. 

¤

Move the voice codecs that you do not 

want the phone to use into the 

 list.

Also select the voice codec in the 

 list (see above) and click on 

the 

 button. 

¤

Sort the voice codecs in the 

 list into the order in which they 

should be suggested to the receiver 

when a connection is established. To 

do this, use the 

 and 

 buttons. 

When establishing a VoIP connection, the 

phone suggests the 1st voice codec in the 

 list to the receiver to begin 

with. If the receiver does not accept this 

voice codec (e.g. because it does not sup-

port it), the 2nd voice codec in the list is 

suggested etc. 
If the receiver does not accept any of the 

voice codecs in the 

 list, the 

connection is not established. An appro-

priate message will be displayed on the 

handset. 

¤

Click on 

 to save the changes.

The 

 list will be shown after 

saving (see Figure 3 on page 56). 
If you want to reject the changes that have 

been made, click on 

. The Web page 

is re-loaded with the data saved on the 

phone.
Please note: If you do not make an entries 

for a lengthy period, the connection to the 

Web configurator is automatically termi-

nated. Unsaved entries are lost. If neces-

sary, implement temporary security meas-

ures. You can subsequently continue the 

entry and make changes if necessary. 

If you have configured a new VoIP connec-

tion, you must also activate it.
In the 

 list:

¤

Activate the relevant option in the 

 column (  = activated).

Your phone will register itself using the 

relevant access data with the VoIP pro-

vider. If the registration is successful, after 

a short period the 

 column will show 

 for the connection. You can now 

be reached on this VoIP phone number. 

Profile files with the general access data 

for the most important VoIP providers are 

available for download on the Siemens 

server on the Internet. The address for the 

server is stored in your phone (page 65).
Navigation: 

¤

Open the following Web page: 

 

¢

 

¢

. 

¤

Click on the 

 button behind the first 

VoIP connection. 

¤

In the 

 area, click on the 

 button. 

This will display information on the down-

load procedure.

– You should only deactivate codecs (put 

them in the 

 list) if there is a 

particular reason. The more codecs are 

deactivated, the greater the danger that 

calls will not be able to be established due 

to unsuccessful codec negotiations. 

– With incoming calls, all supported voice 

codecs are always permitted.