Epson 386 사용자 설명서

I

FLOPPY DISK DRIVE(S) AND CONTROLLER CHECK MENU

1 - Sequential seek check

- Random seek check

-   W r i t e ,   r e a d   c h e c k

4 - Run all above checks

0 - Exit

Enter selection number:

Before any checks are performed, the program determines the number

of diskette drives installed in your computer. If you have more than

one drive, you see this prompt each time you select a test:

Check which drive (A/B)?

Press 

A 

or 

B 

and then 

Enter. 

If any errors occur, record the error

~

code and message and contact your dealer. Always have the diskette

drive serviced by your dealer or service center.

__

This test checks the ability of the read/write heads to locate any part

of the diskette. This action by a read/write head is called a seek.

During this test, each head seeks sequentially from the innermost

track to the outermost track. The innermost track is track 39 for

360KB diskettes and track 79 for 1.2MB, 720KB, and 1.44MB
diskettes.

Select option I from the menu to start this test. The program displays
the number of each track it finds. For example, with a 360KB

diskette, the first message you see is:

Current track is 39

The track number counts down (from 39 or 79) to 0. The seek is

performed by each head, so you see the count twice. If no errors

occur, the menu displays.

C-20

Performing System