Trimble Outdoors aggps 332 사용자 설명서
AgGPS 332 GPS Receiver User Guide 65
Troubleshooting 6
6.1
Problems with the FlashLoader200 Utility
Problem
Possible solution
The FlashLoader 200 utility cannot detect the
receiver or download the firmware.
receiver or download the firmware.
Make sure that:
• Other programs, such as Microsoft
ActiveSync technology, are not using the
COM port that the computer is using.
COM port that the computer is using.
• The receiver is connected to a 12–32 V DC
power source.
• All cables are connected correctly between
the device and the computer.
• The receiver is connected to the correct
computer COM port. To do this:
1. From the FlashLoader200 menu, select
Settings.
2. Select the check box for a serial link.
3. At Port, select Auto. Click
OK
.
4. Select the Upload firmware to receiver
check box.
5. Navigate to where the firmware file is
saved and select the file. Click
Proceed
.
6. From the Auto Port Select dialog, select
Use receiver on port... and click
OK
.
Once you have checked this, turn off the
receiver then turn it on again. Try again to
connect the FlashLoader200 utility.
receiver then turn it on again. Try again to
connect the FlashLoader200 utility.