TP-LINK TD-8816 사용자 설명서

 

34 

Click the BACK button to return to the previous screen. 

Click the CANCEL button to cancel the configuration which is made just now. 

Choose “Advanced Setup→NAT→IP Address Mapping” in Figure 4-22, you can configure the 

Address Mapping Rule in the next screen. The IP Address Mapping is for those VCs that 

configured with multiple IPs. The IP Address Mapping rule is per-VC based (only for Multiple IPs' 

VCs). 

 

Figure 4-25 

 

Figure 4-26 



  Rule Index: Select the Virtual server rule index for this VC. You can specify 10 rules in 

maximum. All the VCs with single IP will use the same Virtual Server rules. 



  Rule Type: There are four types of One-to-One, Many-to-One, Many-to-Many Overload and 

Many-to-Many No-overload. 



  Local Start & End IP: Enter the local IP Address you plan to mapped to. Local Start IP is the 

starting local IP address and Local End IP is the ending local IP address. If the rule is for all 
local IPs, then the Start IP is 0.0.0.0 and the End IP is 255.255.255.255.