Siemens gigaset s450 ip 사용자 설명서

First steps

Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / starting.fm / 30.8.07

ion 4,

.09.

2005

Initial charging and discharging of

batteries

Battery charging is indicated in the top

right of the display by a flashing battery

icon

e, V or U. During handset oper-

ation, the battery icon indicates the

charge status of the batteries (page 1).
The correct charge status can only be dis-

played when the batteries are first fully

charged and discharged through use.

To do this, leave the handset in the

charging cradle without interruption

until the battery icon stops flashing in

the display (around 13 hours).

Once the batteries are fully charged,

remove the handset from the charging

cradle and do not put it back again until

the batteries are fully discharged.

Please note:

u Always repeat the charging and dis-

charging procedure if you remove the

batteries from the handset and reinsert

them.

u The batteries may warm up during

charging. This is not dangerous.

u After a while the charge capacity of the

batteries will decrease for technical rea-

sons.

Setting the date and time

If the date and time on the phone have not

yet been set, the

§Time§

display key will

appear. You can use the

Settings

Date/Time

menu at a later point to enter

the date and time.

Press

§Time§

or open the menu.

Change multiple line input:

Date:

Enter day, month and year in 6-digit

format.

Time:

Enter hours and minutes as 4 digits

(e.g.

Q M 1 5 for 7:15 a.m.

§Save§

Press the display key.

The date and time are shown in the hand-

set's idle display (page 1).

Registering the handset to the base

station

Your handset is registered to the base sta-

tion by default.
Instructions on how to register further

handsets to the base station are given on

page 56.

Installing the base station

The base station is designed for use in

closed, dry rooms with a temperature

range of +5°C to +45°C.

Place or hang the base station in a

central position in your flat or house.

Please note:

u Never expose the telephone to heat

sources, direct sunlight or other electri-

cal appliances.

u Protect your Gigaset from moisture,

dust, corrosive liquids and vapours.

Please note:

After the first battery charge and discharge,

you may place your handset in the charging

cradle after every call.

Please note:

You will find explanations for the symbols and

typographical conventions used in this user

guide in the appendix, page 100.