Siemens Gigaset S450 사용자 설명서
43
Connecting the base station to the PABX
Gigaset S450 / English for Greece / A31008-M1716-T101-1-8U19 / pabx.fm / 07.09.2005
Connecting the base station
to the PABX
to the PABX
The following settings are only needed
when your PABX requires them. Please
refer to the user guide for your PABX.
You cannot send or receive SMS on
PABXs that do not support Calling Line
Identification.
when your PABX requires them. Please
refer to the user guide for your PABX.
You cannot send or receive SMS on
PABXs that do not support Calling Line
Identification.
Dialling modes and flash time
The current setting is indicated by
.
Changing the dialling mode
The following dialling modes can be
selected:
u Tone dialling (DTMF),
u Pulse dialling (DP).
v
selected:
u Tone dialling (DTMF),
u Pulse dialling (DP).
v
¢
Ð
¢
Base
¢
Add. Features
¢
Dialling Mode
s
Select dialling mode (
= on)
and press
§OK§
.
a Press
and
hold (idle status).
Setting the flash time
v
¢
Ð
¢
Base
¢
Add. Features
¢
Recall
s
Select flash time (
= on)
and press
§OK§
.
a Press
and
hold (idle status).
Setting pauses
Changing pause after line seizure
You can change the length of pause that
is inserted between pressing the talk key
is inserted between pressing the talk key
c and sending the number.
v
v
Open menu.
5 5 O 1 L
Press keys.
~
Enter digit for the pause
length (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press
length (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press
§OK§
.
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v Open
your PABX requires this (refer to the user
guide for your PABX).
v Open
menu.
5 5 O 1 2
Press keys.
~
Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
§OK§
.
Changing the dialling pause
v Open
menu.
5 5 O 1 1
Press keys.
~
Enter a digit for the length of
the pause (1 = 1 sec.;
2 = 2 secs.; 3 = 3 secs.;
4 = 6 secs.) and press
the pause (1 = 1 sec.;
2 = 2 secs.; 3 = 3 secs.;
4 = 6 secs.) and press
§OK§
.
To insert a dialling pause: press
S for
2 seconds. A
P appears in the display.
Switching temporarily to
tone dialling (DTMF)
tone dialling (DTMF)
If your PABX still operates with dial
pulsing (DP), but you need tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
tone dialling for the call.
Requirement: You are conducting a call
or have already dialled an external
number.
pulsing (DP), but you need tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
tone dialling for the call.
Requirement: You are conducting a call
or have already dialled an external
number.
§Options§
Open
menu.
Tone Dialing
Select and press
§OK§
.
Tone dialling is now activated
for this call only.
for this call only.
‰
‰
‰