Epson artisan 700 series 사용자 설명서
24
Printing From Your Camera’s Memory Card
■
Print Settings
to change the paper type and size, or other print settings
■
Photo Adjustments
to turn on red-eye reduction or other features
When you’re done selecting settings, press
OK
.
12. When you’re ready to print, press x
Start
.
To cancel printing, press y
Stop/Clear Settings
.
Printing From a Camera
If you have a digital camera that supports PictBridge
™
printing, you can connect it
to the Artisan 700 Series and print your photos directly from the camera. Check
your camera manual to see if it is compatible.
your camera manual to see if it is compatible.
Your photos must be in JPEG format and sized from 80 × 80 to 9200 × 9200 pixels.
Note:
Epson cannot guarantee the compatibility of any cameras. Some combinations of paper
types, sizes, and layouts may not be supported, depending on your camera and the
Artisan 700 Series settings.
Epson cannot guarantee the compatibility of any cameras. Some combinations of paper
types, sizes, and layouts may not be supported, depending on your camera and the
Artisan 700 Series settings.
1. Remove any inserted memory card from the Artisan 700 Series.
2. Connect the USB cable that came with your camera to the
USB
connector on the front of your Artisan 700 Series.
3. Turn on your camera. You see a connection message on the Artisan 700 Series
display screen.
4. Load Epson photo paper (see page 7).
5. Press the
Home
button until
Setup
is selected, then press
OK
.
Art700Basics.book Page 24 Monday, July 7, 2008 4:13 PM