Epson artisan 700 series 사용자 설명서
42
Printing From Your Computer
Mac OS X
Follow the Macintosh printing instructions beginning on page 35 (Mac OS X
10.5) or page 37 (Mac OS X 10.3 and 10.4), but complete the additional steps
below before you start printing.
10.5) or page 37 (Mac OS X 10.3 and 10.4), but complete the additional steps
below before you start printing.
1. Select
Auto Duplex Printing Settings
from the pop-up menu.
2. Select
Auto Duplex Printing
.
Note:
If you see a message indicating that the auto duplexer is not installed, open
EPSON Printer Utility3 (in the Applications folder on your hard drive), select
Artisan 700 Series, click OK, click the Printer and Option Information button,
and click OK again. Then close and reopen the print window.
If you see a message indicating that the auto duplexer is not installed, open
EPSON Printer Utility3 (in the Applications folder on your hard drive), select
Artisan 700 Series, click OK, click the Printer and Option Information button,
and click OK again. Then close and reopen the print window.
3. If you’re printing on plain paper and you notice that ink smears or bleeds
through the page, you may need to reduce the print density and increase the
ink drying time.
ink drying time.
Pop-up menu
Click here
Art700Basics.book Page 42 Monday, July 7, 2008 4:13 PM