Epson EMP-100NL 사용자 설명서

20 - Parts, Names and Operations

Range of Remote Control Operations

Depending on the distance and angle from the main unit’s light receiving area, there are cases
where the remote control will not function. Ensure that the remote control is used within the fol-
lowing conditions:

● Operable distance: Approximately 10 meters
● Operable range:

Point

· Ensure that the [R/C ON OFF] switch is set at [ON] when using the remote control unit.
· Aim the remote control at the projector’s light-receiving area.
· There are cases where the operable distance (approximately 10 meters) of the remote

control is diminished when signals are reflected off screens depending on the type of
screen in use.

· Ensure that sunlight and florescent lighting is not shone directly into the projector’s light-

receiving area.

· If the remote control will not function or malfunctions, there is a possibility that the batter-

ies need changing. In this event, replace the batteries accordingly.

· Use the optional remote control receiver if it is to be used at a distance of 10m or more.

(Front Panel)

(Rear Panel)

Approximately 30
degrees

Light-emitting area on
the remote control

Approximately 15
degrees