Siemens gigaset 2010 사용자 설명서

다운로드
페이지 71
Notes on operation
5
Kap03.fm5
18.11.98
Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619
Notes on operation
Installing the base station
Installation site/installation area
A 220/230V power socket must be located at the in-
stallation site.
In order to avoid interference, the base station should 
not be in the direct vicinity of other electronic equip-
ment such as HiFi, office or microwave equipment.
Place the base station on a level, non-slip surface. The 
device feet do not normally leave any unsightly marks. 
However, due to the variety of varnishes and polish 
used on furniture, the possibility of marks cannot be 
entirely ruled out.
Radio transmission between the base station and 
handsets complies with the DECT standard. Gigaset 
2010 thus observes all relevant regulations. However, 
if there is interference to the picture or sound of your 
satellite equipment, consult your specialist satellite 
dealer.
Depending on ambient conditions, the maximum ra-
dio range between the base station and the handset 
is approx. 300 m outdoors, and approx. 50 m indoors. 
If the range warning is activated for the handset 
(➔ page 36), a signal will sound when you move out-
side the radio range.
Temperature/ambient conditions
The base station is designed for operation in protect-
ed areas with a temperature range from +5 °C to +45° 
C. 
The base station should not be installed in damp ar-
eas (such as bathrooms or laundry rooms), or close to 
heat sources, or in direct sunlight.