Siemens gigaset 2010 사용자 설명서

KAP06.FM5

14.8.98

Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619

If your telepone is connected to a line with dial pulsing 

(DP), you can switch to dual-tone multifrequency signaling 

(DTMF) once the connection has been set up.

Precondition: an external connection exists.

If the handset has been locked for external calls

(➔ page 46) and a DSS number is stored (➔ page 46),

it is possible to dial this direct number despite the lock.

B 

*

Select and confirm.

When you have switched to DTMF, you can 

switch between the two signaling methods dur-

ing the connection using the 

R

 signal key. 

When the line is disconnected, the telephone 

will automatically return to the original signaling 

method.
Any digits or symbols that you enter after swit-

ching signaling methods are not stored in the 

memory for redialing.

o

Press any key on the handset. The direct number is

dialed.

It is not possible to dial a DSS number from a 

locked handset,

●

if “unrestricted trunk access or outward re-

stricted trunk access“ is set (➔ page 45), or

●

if the base station is locked 

(➔ page 41).

Replace the handset in the loading unit. The line is dis-

connected.

a

Disconnect (on-hook key).