Sun Microsystems enterprise server 220r 사용자 설명서
8
Sun Enterprise 220R Server Owner’s Guide • October 1999
Keyswitch Settings
The front panel keyswitch controls the power-on modes of the system. The following
table describes the function of each switch setting.
table describes the function of each switch setting.
Keyswitch Setting
Icon
Description
Power-On/Off
This setting enables the system’s Power button to
power on, or to power off, the system. If the system
hangs, holding the Power button down for five seconds
while the keyswitch is in this positon will cause an
immediate hardware power off.
power on, or to power off, the system. If the system
hangs, holding the Power button down for five seconds
while the keyswitch is in this positon will cause an
immediate hardware power off.
Locked
This setting disables the system’s Power button, and
also locks the front doors preventing access to the disk
drives and to the power supplies.
The Locked position is the recommended setting for
normal day-to-day operation of the system.
also locks the front doors preventing access to the disk
drives and to the power supplies.
The Locked position is the recommended setting for
normal day-to-day operation of the system.
Standby
This setting places the system in Standby mode by
turning off power to all internal system components
and by placing the power supplies in Standby mode.
When the keyswitch is in this position the server’s
Power button is disabled.
turning off power to all internal system components
and by placing the power supplies in Standby mode.
When the keyswitch is in this position the server’s
Power button is disabled.