Epson EX51 사용자 설명서

다운로드
페이지 120
76
Fine-Tuning the Projector
7. When the message 
Save this image as the User’s Logo?
 
appears, select 
Yes
 and press 
Enter
. Saving the logo may take a 
few moments. Do not use your projector, remote control, or 
video source while the logo is being saved.
8. When you see the message 
Completed
, press 
Menu
 to exit. 
Choosing When to Display the Image
After your image is saved, you can set it to display as the startup 
screen, the screen you see when there’s no signal, or the screen you see 
when you press the 
A/V Mute
 button (see page 54).
1. Press the 
Menu
 button, highlight the 
Extended 
menu, and press 
Enter
2. Select 
Display
 and press 
Enter
.
3. Choose from these display options:
Set 
Display Background
 to 
Logo
 to display your image 
when there is no signal. 
Set 
Startup Screen
 to 
On
 to display your image when the 
projector is warming up. 
Set 
A/V Mute
 to 
Logo
 to display your image when you press 
the 
A/V Mute
 button. 
4. When you’re finished, press
 Menu
 to exit. 
Disabling the Projector’s Buttons
When you enable the Control Panel Lock function, you can lock all of 
the projector’s buttons, or all of the buttons except the Ppower 
button. The remote control can still be used to operate the projector.
1. Press the 
Menu
 button, highlight the 
Settings
 menu, and press 
Enter
.
2. Select 
Control Panel Lock
 and press the 
Enter
 button.
note
You can lock these settings to 
prevent them from being 
changed without a password 
(see page 73).