SMC Networks robo cylinder ra5c 사용자 설명서
20
Mounting hole
Affixing nut
Trunnion ring
Bracket A
Bracket B
Reversing type
Mating
material
is
steel
Mating material is aluminum
Screw size
M6
M6
Tightening torque
12.3 N-m
5.4 N-m
Caution:
Exercise caution when installing the actuator horizontally using the optional clevis or
trunnion or any commercially available free joint, because the rod will receive the
actuator weight. As a result, the bush may wear quickly or internal mechanical parts
may be damaged.
If the actuator is installed horizontally using any of the aforementioned means, add a
guide or other appropriate mechanism to prevent the rod from receiving the actuator
weight.
trunnion or any commercially available free joint, because the rod will receive the
actuator weight. As a result, the bush may wear quickly or internal mechanical parts
may be damaged.
If the actuator is installed horizontally using any of the aforementioned means, add a
guide or other appropriate mechanism to prevent the rod from receiving the actuator
weight.
Caution:
The optional clevis and trunnion are designed so that the fulcrum shaft can only
receive radial load. In a condition where play is not permitted or thrust load is
received, the customer must design a separate bearing structure.
receive radial load. In a condition where play is not permitted or thrust load is
received, the customer must design a separate bearing structure.
Caution:
The optional clevis and trunnion provide structures whereby the bearing supports the
fulcrum shaft. Apply grease to the fulcrum shaft.
fulcrum shaft. Apply grease to the fulcrum shaft.