Epson professional series ii 사용자 설명서
Pressing
FUNCT
accesses the display parameters in the order
listed in the table below.
You
can press
MEM RCL
to move
backward through the parameters.
Display parameter order
Parameter
LCD message
Horizontal phase
Hor Phase
Width
Vertical shift
, Vert Shift
Height
Vertical convergence
l
Horizontal convergence
l
Changes you make to these parameters apply to all video modes.
Sections later in this manual describe how to set them.
Sections later in this manual describe how to set them.
Note
If you press
FUNCT
when the LCD displays
Color Temp
: 3, the LCD displays a message such as
RED adjust :
5.
To exit from this display, press
MEM SEL
twice.
3. Adjust the image using the Adjustment button as described
in the table on pages 23 and 24.
4.
Press
FUNCT
until you see the name of the next parameter
(if any) you want to
change and then
adjust the image.
5. Repeat steps 3 and 4 until you are satisfied with the image
you see.
2 6
Professional Series II Monitor