Siemens m101 사용자 설명서

gigam101.fm5

21.4.99

Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 

You can set the COM port of the PC at which the lokale Station 

is connected in the upper section of the tab.

It is easiest to leave the option No automatic detection deacti-

vated (as shown). The program then checks the existing COM 

ports and determines where the station is connected. Manual 

interface selection is only recommended if there is more than 

one Gigaset M101 Data unit connected to the PC.

As soon as the program finds a station or identifies the manually 

selected interface, it sends it the configuration command via 

the control lines. The station is thus switched to configuration 

status. This is indicated by the Status display in the dialog box. 

Gigaset M101 Data can only be configured under these condi-

tions. At the end of the program, your Gigaset M101 Data will 

automatically switch the station back to operating mode.

This sections indicates whether a radio connection exists and if 

so, to which partner station. It also indicates the quality of the 

connection.

A station must be registered before it can be selected here.