Siemens HIPATH 3000 사용자 설명서
First Steps and User Configuration
Nur für den internen Gebrauch
A31003-G2540-A100-3-76A9, 04/2003
3-4
optiClient 130 V4.0, User Manual
3benkonf.fm
Working with the Administration Tool
3.2.1
Configuring PC settings
To configure the parameters for the PC settings, proceed as follows:
1.
After starting the administration tool, select the PC settings tab.
Display
2.
The current folder where the ’local’ profile file is saved is displayed under Profile folder in
the Path field. If the users always work at the same workstation, then it is not necessary to
change the default directory shown in the example. If the users use their phone number on
a number of different workstations, a network directory that is accessible from all worksta-
tions must be specified. The profile file is saved in the specified directory under the name
profile.cfg
the Path field. If the users always work at the same workstation, then it is not necessary to
change the default directory shown in the example. If the users use their phone number on
a number of different workstations, a network directory that is accessible from all worksta-
tions must be specified. The profile file is saved in the specified directory under the name
profile.cfg
.
3.
If users with new phone numbers should be able to change their phone number’s specified
default settings individually, enable the option Allow individual setting changes on this
PC with optiClient 130 V4. If this option is not enabled, the default settings for new phone
numbers are used and cannot be changed by the user under the Option Settings.
default settings individually, enable the option Allow individual setting changes on this
PC with optiClient 130 V4. If this option is not enabled, the default settings for new phone
numbers are used and cannot be changed by the user under the Option Settings.