Siemens HIPATH 5000 사용자 설명서
3benkonf.fm
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
optiClient 130 V4.0, User Manual
3-11
Nur für den internen Gebrauch
First Steps and User Configuration
Starting the Program
3.3
Starting the Program
General
Following the installation, three versions of the optiClient 130 with three different user interfaces
are available. If you are logging on with a phone number for the first time, either the default set-
tings will be used (if configured), or you must supply the necessary information after the pro-
gram starts. In addition to these settings there are also additional workstation-specific settings,
which can be configured later (see section Option Settings for the optiClient phone or Option
Settings for the optiClient office).
are available. If you are logging on with a phone number for the first time, either the default set-
tings will be used (if configured), or you must supply the necessary information after the pro-
gram starts. In addition to these settings there are also additional workstation-specific settings,
which can be configured later (see section Option Settings for the optiClient phone or Option
Settings for the optiClient office).
Starting the Program
You can start the program by:
●
double-clicking one of the shortcuts on the desktop
●
selecting
Start - Programs - optiClient 130 V4 - optiClient office or optiClient phone or op-
tiClient easyCom