Siemens Gigaset SL56 사용자 설명서

Gigaset SL56 / IM1 EN / A31008-M1752-R111-2-6Z19 / start_guide_time.fm / 24.7.07

Wipe the base station, charging cradle and 

handset with a damp cloth (do not use 

solvent) or an antistatic cloth. 
Never use a dry cloth. This can cause 

static. 

If the handset has come into contact with 

liquid:
1. Switch off the handset and remove 

the battery pack immediately.

2. Allow the liquid to drain from the hand-

set.

3. Pat all parts dry, then place the handset 

with the battery compartment open 

and the keypad facing down in a dry, 

warm place for at least 72 hours (not 

in a microwave, oven etc.).

When it has fully dried out, you will nor-

mally be able to use it again.

If you have any questions about using 

your handset, visit us at any time at 

www.siemens.com/gigasetcustomercare. 

The table below contains a list of common 

problems and possible solutions.

We offer you support that is fast and tai-

lored to your specific needs! 
Our Online Support on the Internet can be 

reached any time from anywhere.

ercare 

It provides you with 24/7 support for all 

our products. It also provides a list of FAQs 

and answers plus user guides and current 

software updates (if available for the prod-

uct) for you to download.
You will also find frequently asked ques-

tions and answers in the appendix of this 

user guide. 

The display is blank. 
1. The handset is not switched on.

¥

Press and hold the end call key 

a

.

2. The battery pack is flat.

¥

Charge/replace the battery pack 

The handset does not respond to a key press. 
The keypad lock is activated.

¥

Press and hold the hash key 

#

 "Base station x" is flashing in the display.
1. The handset is outside the range of the base 

station.

¥

Reduce the distance between handset/

base station.

2. The handset has been de-registered.

¥

Register the handset (page 5).

3. The base station is not switched on.

¥

Check the base station mains adapter.

 is flashing in the display. 

The handset is set for 

 and no base sta-

tion is switched on or within range.

¥

Reduce the distance between handset/base 

station.

¥

Check the base station mains adapter.

Handset does not ring. 
The ringtone is switched off.

¥

Activate the ringtone (page 18).

The other party cannot hear you. 
You have pressed the 

u

 (INT) key. The hand-

set is "muted".

¥

Switch on the microphone again (page 8).

You hear an error tone when keying an input 
(a descending sequence of tones).
Action has failed/invalid input. 

¥

Repeat the operation. 
Watch the display and refer to the instruc-

tions if necessary.