Parker Hannifin mx80l precision grade 사용자 설명서

 

28 

 

•  Catalog specifications may deviate for positioners mounted to surfaces that do not meet the above 

conditions.  

•  If the intended mounting surface cannot meet these specifications a separate rigid mounting plate 

meeting these specifications should be used to mount to the main structure.  

 

•  If mounting conditions require that the table base is overhung, table specifications will not be met 

over that portion of the table. Additionally, in X-Y Systems the overhung portion of the Y-axis may 
not met specifications due to the additional error caused by deflection and non-support of the 
base. Contact Daedal for guidelines on specifications of overhang applications 

 

 

Dowel holes are included in the carriage of the MX80L for repeatable mounting of loads/fixturing.  When 
bolting payload to carriage take precaution in using bolts M4 with 7mm of engagement as to not damage 
the table. 

 

 

The MX80L compact design requires proper sized bolts to be used when mounting payloads to the 
carriage.  Excessive length bolts can damage bearings or pin the table in position.     

Daedal Division 
Irwin, Pennsylvania