Burley solo 사용자 설명서

3

Burley Solo Owner’s Instruction and Safety Manual

I.  Hardware Bag Contents and Tool List

IMPORTANT: Please verify that you have received all of the 
con tents listed. Do not pro ceed with as sem bly if any parts are 
missing; contact Bur ley im me di ate ly for replacement parts.

Hardware Bag Contents

Wheel refl ectors:
(2) large red rear refl ectors 
(2) Self-tapping hex head refl ector screws
(2) 1” plastic refl ector brackets

Brake:
(1) brake with mounting clamps, bolt, nut, and instruction sheet.

Envelope:
Burley Checklist
Warranty Card
Burley Solo Owner’s Instruction & Safety Manual

II. Mounting 

the 

Refl ectors

The red refl ectors install onto the rear of the main frame tube of the trailer on the 

right and left sides. The main frame tubes run along either side of the trailer bottom 

frame. 

1.  The bracket (A) mounts as shown on the 

section of the main frame tube that extends 

behind the trailer (B). Tighten the clamp onto 

the tube so that the two holes used to mount 

the refl ector are horizontal.

2.  Screw the refl ector (C) onto the bracket as 

shown.  

3.  The lower screw on the refl ector bracket 

is used to adjust the angle of the refl ector.  

Adjust the angle of the refl ector to ensure 

that the back face is oriented vertically to the 

ground, so that the refl ector points directly 

back when the trailer is attached to the bike.

4.  Repeat 1-3 for the other side of the trailer. 

 Phillips 

screwdriver

 

9/16" socket and torque wrench

 

Flat blade screwdriver