Polycom VVX 1500 D 사용자 설명서

 Setting Up the Polycom VVX 1500 D Phone

2 - 7

You can make changes to the phone’s configuration through the web interface 

to the phone. The factory default username and password for the web interface 

is Polycom and 456 respectively (the username is case sensitive).

Using your chosen browser, do the following:

To get the phone’s IP address, press the Menu key, and then selecting 

Status > Platform > Phone. Scroll down to see the IP address.

Enter the phone’s IP address as the browser address.
You will be prompted for the web interface username and password.
A web page similar to the one shown below appears.

Blind transfer, call recording, picture frame, corporate directory (LDAP Integration), 
and phone server redundancy cannot be enabled/disabled through the web 
interface. You cannot change the displayed language through the web interface. 
You must make changes for these features through the configuration files. Refer to 

 on page 

.

Changes made through the web interface are written to the override file (highest 
priority). These changes remain active until Settings > Advanced > Admin 
Settings> Reset to Default > Reset Local Config... is performed.