Pontiac G5 사용자 설명서
Headlamp aiming is done with the vehicle’s
low-beam headlamps. The high-beam headlamps
will be correctly aimed if the low-beam headlamps
are aimed properly.
low-beam headlamps. The high-beam headlamps
will be correctly aimed if the low-beam headlamps
are aimed properly.
The vertical headlamp aiming screws are located
under the hood near the headlamps.
under the hood near the headlamps.
The adjustment screw can be turned with a 6 mm
socket wrench.
socket wrench.
To adjust the vertical aim on the headlamps, do
the following:
the following:
1. Open the hood. See Hood Release on
page 277 for more information.
2. Locate the aim dot on the lens of the
low-beam headlamp.
3. Measure the distance from the ground to the
aim dot on the low-beam headlamp. Record
the distance.
the distance.
309