Peerless Industries PT640 사용자 설명서

Peerless Industries, Inc.
3215 W. North Ave.  Melrose Park, IL 60160
708-865-8870   800-865-2112  Fax 708-865-2941

© 2008 Peerless Industries, Inc.  All rights reserved.

Peerless is a registered trademark; Paramount and Sorted-For-You are trademarks of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

Weight:
6.71 lb (3.1 kg)

Shipping weight:
8.4 lb (3.9 kg)

Maximum Load Capacity:
150 lb (68 kg)

Shipping Carton dimensions:
L = 20.25 in (515 mm)
W = 8.5 in (216 mm)
H = 3.88 in (99 mm)

Easily install mid-size screens with this simple, intuitive
mounting solution. Its three step installation combined
with its tool-less, one-touch tilt angle adjustment enables
flat panel screens to be installed and adjusted fast.

• Universal mount accommodates screens with mounting

patters up to 17.5" W x 12.94" H

• Adjustable 15° forward tilt and -5° backward tilt for

finding the optimal viewing angle.

• Easy-grip handle locks the screen position into place
• Optional IncreLok

TM

 feature offers fixed tilt angles of -5°,

0°, 5°, 10°, 15°

• Easy-glide brackets easily hook onto wall plate for a

simple, safe and quick installation

• Horizontal screen adjustment of up to 6" (depending on

screen model) for perfect screen placement

• Mounts to wood studs, concrete, cinder block or metal

studs (metal stud accessory required)

• Comes with Peerless' Sorted-for-You

TM 

fastener pack

with all necessary screen attachment hardware

• UL listed

• ACC415 - Metal Stud Fastener Kit
• PS200 - Paramount™ A/V Component Shelf

A R C H I T E C T S   S P E C I F I C A T I O N S

*NOTE: 

Most 42" and larger plasma screens may not

work wth this mount. Use Mount finder to confirm
compatibility.

TECHNICAL DATA SHEET -

The Paramount

®

 

Universal Tilt Wall Mount shall be Peerless models                                and shall be located where indicated on the plans. It shall

feature adjustable 15° of forward tilt and -5° backward tilt. It shall be constructed of heavy gauge cold rolled steel and finished with scratch
resistant gloss black fused epoxy. Assembly and installation shall be done according to instructions provided by the manufacturer.